HControl Hybrid is a thin multifoil insulation product with a built-in vapour control function and an unrivalled thermal performance. This product is a direct replacement of the TRI-OSO multi foil (that is no longer manufactured in the UK).
HControl Hybrid provides dual performance within a single product: a vapour control layer and insulation, allowing a reduction in the number of installation steps whilst reducing the thickness of the main insulation to achieve the same required U-value. It can be used in conjunction with any type of insulation.
Features:
Z-value > 1000 MNs/g
Available in rolls of 10m² (1600mm width) in a 45mm thickness.
Achieves a declared core R-value of 1.90 m2.K/W (with no air gaps - in direct contact)
R-value of 3.20 m2.K/W with 2 air voids of 20 mm (horizontal flow), as certified by VTT.
HControl Hybrid is airtight, acts as a barrier against air leakages and thermal convection.
In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.
Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event, credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.