The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods.

The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time.

The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster.

The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener.

Specification:
Nail Diameter: 2.8-3.3mm
Nail length: 50-90mm
Magazine Capacity: up to 55 nails
Firing mode: Bump and Sequential
Weight: 4.1kg

DEWALT DCN692N Cordless XR 2 Speed Framing Nailer

Bare unit, NO battery or charger supplied.
More Information
Operation TypeBattery
TypeNailer
BrandDeWalt
Reviews

We deliver local and nationwide any day except Saturdays, Sundays and Bank Holidays.

We will contact you via text the evening before with a 90-minute timeslot for your delivery, so you can plan your day.

If your order is within our designated area, then we will deliver it for FREE NEXT DAY (subject to availability and minimum order value).

Click here for our delivery areas and charges.

Check for Free Delivery

Returns and Refunds Policy

In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.


Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event, credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.

View our full Returns and Refunds Policy.