The DW089K Self-Levelling 3 Beam Line Layout Laser aids in a 90-degree layout. Features 2 times brighter diode to increase visibility in bright job site conditions. Built-in magnetic pivot bracket mounts easily on metal surfaces.
Features:
3-beam line laser to aid in 90-degree layout
2 times brighter diode to increase visibility in bright job-site conditions
Built-in magnetic pivot bracket mounts easily on metal surfaces
Micro-adjust knob for precise alignment of 90-degree intersecting lines over greater distances
Self-levelling cross line laser is accurate to ±0.3 mm/m in levelling applications
Self-Levelling up to 4 degrees surface angle with automatic out of level indication marks a levelled line in seconds
3 button operation and low battery indication for ease of use
An adjustment dial for fine line movement (vertical & side)
Built-in magnetic pivot bracket mounts easily on metal surfaces
Overmolded housing helps maintain calibration under jobsite conditions
Includes 4 x AA batteries for 25 hours runtime
Kit box protects the unit and helps maintain calibration when stored in the gang box
Compatible with DE0892 (sold separately) for increasing detection distance up to 50m
Supplied with:
1 x DW089 Multi-Line Laser
4 x AA Alkaline Batteries
1 x Wall Mount Bracket
1 x Heavy Duty Carry Case
In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.
Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event, credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.