2..4m mesh bead, designed for use with one coat plasterwork down to a 3mm finish. Fine mesh wings to provide an excellent plastering key. Beads may be cut to size as required by using a hacksaw and snips. Beads should be stored off the ground and in dry conditions during site work.
Installation is usually achieved by pressing the wings firmly into plaster dabs placed at approximately 600mm centres on both sides of the arris. The wings may alternatively be embedded into the first coat of plaster for normal two-coat work.
Benefits:
Galvanized finish to resist corrosion
Mesh wing adds strength and increases the bond
Reinforces plaster edges to prevent accidental damage
As it is a thinner bead requires less plaster for skimming
Can be fixed with plaster, adhesive or mechanical fixings
To suit 3mm skim coat on existing plaster and plasterboard
In the unlikely event that a delivered product is faulty or damaged, we will exchange it or provide you with a full refund, as long as we are notified of the product’s fault within 48 hours of it being delivered to you.
Champion Timber shall not accept on return for credit any goods ordered from Champion Timber incorrectly or subsequently found to be surplus to the customer’s requirements. The suitability of specialist goods is assumed to have been assessed by the customer or his/her advisor(s) prior to purchase. Champion Timber shall endeavour to assist customers where possible by accepting at a reasonable restocking charge the return of goods (together with the original packing if applicable) which are from Champion Timber normal stock lines but goods ordered from the manufacturer cannot be accepted without Champion Timber prior agreement for the return and Champion Timber restocking charges having been paid. In any event, credit cannot be given unless the customer provides Champion Timber with the number of the invoice on which the goods were supplied.